Bails

Also
see our sterling silver Tubes
with Loops beads |
Barrettes

Glue,
solder or rivet ornaments onto these spring-hardened steel
barrettes. These French-style barrettes are measured end
to end across the top surface. The 80mm (3 1/4") style
is the most popular seller. Made in the Orient.
|
Bead
Caps
Sterling Silver
Pewter
Gold
Tone
Silver Tone

Bead caps are used to cap one
or both ends of a bead, thus adding more detail and texture
to the design of the piece. Gold-plate, imit. rhod. plate
(nickel color), pewter, and sterling silver.

Also check
out
Bali Bead Caps:
- Sterling
Silver
- Vermeil
|
Bead Tips
These
are also called "Knot Covers"
Now in Antiqued Copper and
Gunmetal, as well. |
|
Bell Caps

Use E6000 to glue
these onto a tumbled stone, crystal point, or any other item,
to make a pendant. You will also need to add a jump
ring.
|
Bolo Tips, Slides, Cords,
Parts
|
Brooch Converters
|
Buttons
(sterling silver, czech glass, pewter, gemstone/shell
buttons)
|
Button Covers
|
Clamps
Pictured above are a foldover or wing clamp
(left) and a ribbon clamp (right).
Also see our
Foldover
Clasps
Adjustable
End Caps For Thick Cords
|
Coil
Clasps For Leather and Thick Cords

Read about How
To Use Coil Clasps With Leather!
Read about Tying Slip Knots in Leather and Other
Thick Cords
Now in Antiqued Copper and Gunmetal, as
well.
Also check out Cord
and Chain Ends and End
Caps, Crimp
Ends, as well as Hook & Eye
Clasps .
|
Cones

Read about Finishing
Multistrand Necklaces With Cones
Also check out Bali
Cones and End
Caps
East Indian Ethnic Metal Beads (some very large cones
in copper, silver-plate and brass) |
|
Cord
and Chain Ends

Solder chain or glue
cord into these end caps.
Also
check out End
Caps, Coil
Clasps For Leather and Thick Cords, Hook & Eye
Clasps ,Crimp
Ends and End
Caps. |
Crimp
Beads, Tubes, and.
Crimp
Covers
and,
Horse Shoes (wire protectors)

Use Crimp Beads or Tubes to
finish off Tigertail or Soft-Flex wire
projects. Flatten the crimp bead with chain-nose
pliers or crimping
pliers . We
most often use the 2mm round crimp or 2mm tube crimp. Available
in silver-plate, gold-plate, nickel-plate, black, gunmetal,
copper, brass oxidized (dull), sterling silver and gold-filled.


Use
Crimp Bead Covers to hide the crushed crimp beads.
Simply squeeze the cover over the crimp, using a crimping
or other pliers.

Use Horse
Shoes (wire protectors)
to hide and protect the cable wire that loops into and
around the clasp at the point you crush the cable wire.
This also forces you to leave the correct size loop
between
the crushed crimp and the clasp or ring. Will work with
cable wire that is .019" or thinner.

[Read about: Using
the Crimper Pliers .]
|
Crimp
Ends

Finish your cord jewelry with these
stylish crimp ends! They're ideal for use with leather, rubber
and satin cord. Add a little glue, like E6000,
to your cord. Push the cord into the crimp
end. Simply crimp the center with round-nose pliers to secure the
cord in place. Handcrafted
in Indonesia and Israel. Designs may vary slightly.
Also check out Cord
and Chain Ends and End
Caps, Coil
Clasps For Leather and Thick Cords, as
well as Hook & Eye
Clasps ,
Adjustable
End Caps For Thick Cords. |
|